Amprobe ACD-10 PLUS 600A Clamp Multimeter

Product By Flir Logo

The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters (only 0.4?/10mm thick) allowing access to tight measurement areas and still handles conductors up to 1.0 (25mm).

It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including ac/dc current and voltage, capacitance, and frequency.

AC Voltage4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current40.00 A, 400.0 A, 600 A
Resistance400.0 µ?, 4.000 ?, 40.00 ?, 400.0 ?, 4.000 M?, 40.00 M?
Capacitance500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency40 Hz ? 400 Hz with Jaw, 10 Hz ? 100 kHz with test leads
Dual displays
Micro Amps
Accommodates conductorsup to 1.0? (25 mm) in diameter
Display:3-3/4 digits 4000 counts LCD display
Update rate:3 per second nominal
Operating temperature:°C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude:Operating below 2000m; Indoor use
Storage temperature:-20 °C to 60 °C, < 80% RH (with battery removed)
Temperature coefficient:nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low battery:Below approx. 2.4V
Power supply:3V coin battery IEC-CR2032
Power consumption:2.8 mA typical except that 3.3 mA typical for ACA function
APO timing:Idle for 30 minutes
APO consumption:5 µA typical
Jaw opening conductor diameter:max 26 mm
Special features:30ms Max Hold; Data Hold; Relative Zero mode