Fluke 190-102 - 20 years of ScopeMeter® Test Tool Innovation
As the first two-channel portable scope safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter® 190-102 combines an unprecedented level of performance, ruggedness, and portability with100MHz bandwidth and real-time sampling rates up to 1.25 GS/s and 200 ps resolution to capture noise and other disturbances. This model feature deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter® test tools are hand-held battery operated, designed to meet the demands of field service professionals.
Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating
The Fluke ScopeMeter® 190-102 portable scope is double-insulated two-channel floating oscilloscopes safety rated for measurements in CAT III 1000V/CAT IV 600V environments.
Three-dimensional testing for industrial systems
Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:
Three-phase testing for diagnosing VSD, power inverters, and converters
Safely measure from mV to kV
Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.
Take on the Harshest Conditions with the only IP-51-rated Scope on the Market
Rugged and shock-proof, all ScopeMeter® portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants, ensuring reliable accurate performance every time you need them.
Built in multimeter to quickly and conveniently perform precise measurements
Built-in digital multimeter with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.
Work a Full Shift on a Single Charge
New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.
Capture and Share Waveforms Easily with New USB connectivity
Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.
See a Stable Display Instantly with Connect-and-View™ Triggering
Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.
Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™
ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)
Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults
Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter® test tool helps find those faults by:
Tektronix THS3000 Handheld Oscilloscope
The Tektronix THS3000 Handheld Oscilloscope has been discontinued, but customers can find a nearly identical replacement with the Fluke 190 ScopeMeter® Test Tool.
See how the models compare:
|THS3000||Fluke 190 ScopeMeter||Feature / Capability Differences|
|Platform||The Tektronix THS 3000 and Fluke 190 ScopeMeter Test Tool share the same electronics, with some feature differences highlighted below|
|Sampling size||2.5 GS/s max real time sampling rate; 5 GS/s max sequential sampling rate||2.5 GS/s max real time sampling rate||Real time sampling rate to capture all the details for troubleshooting electronic circuits|
|Safety rating||CAT III||CAT IV||Fluke 190 Series II covers all application installations from CAT II to CATIV|
|IP rating according to IEC529||IP 41||IP 51||Fluke 190 Series with IP51 rating is less susceptible to harm caused by environmental conditions no matter where it is used in a lab or the field|
|Software||OpenChoice||FlukeView®||FlukeView® makes it easy to extract, analyze and document waveforms|
|Probe size||Lab size||Industrial size||Optional Fluke VPS-510-x Probes offer same size and performance as standard lab grade scope probe|
|Number of channels||100 MHz: 2 channels|
|Real-time sample rate||1.25 GS/s|
|Inputs||2 scope plus DMM input|
|Independently floating isolated inputs||Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground|
|Timebase range||5 ns - 2 min/div|
|Input sensitivity||2 mV-100 V/div|
|Trigger types||Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle|
|Trigger source||Any scope input channel, or external via DMM input|
|Glitch capture||8 ns|
|Scope measurements||Cursor: 7|
|Maximum record length||ScopeRecord mode: 30,000 pts|
|Scope mode: 10,000 pts per input|
|Persistence||Digital persistence giving analog oscilloscope-like waveform decay|
|Waveform compare||Waveform reference with automatic Pass/Fail testing|
|Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)||4 mm banana inputs, fully isolated from scope inputs and from scope ground|
|Maximum resolution||5000 counts|
|Measurements||VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)|
|Screen + Setup: 30|
|Display||153 mm full color LCD with fast update rate|
|Operating temperature||0 °C to 40 °C Including Batteries|
|0 °C to 50 °C Excluding Batteries|
|Storage temperature||-20 °C to +60 °C|
|Operating altitude||Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V|
|Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V|
|Electrical safety||1,000V CAT III/600V CAT IV (EN61010-1)|
|Mechanical and General Specifications|
|Size||270 x 190 x 70 mm|
|Warranty||3-years on main instrument, 1-year on accessories|
|Li-Ion battery||BP290 2400 mAh Li-ion battery up to 4 hours included standard|
|VPS410 Voltage Probe Sets (one red, one blue)|
|TL175 TwistGuard™ safety designed Test Lead Set (red and black)|
|BC190 Battery Charger/mains Adapter|
|BP290 2400 mAh Li-ion Battery|
|Handstrap (affixed to instrument)|
|Multi-Language User Manuals on CD-Rom|
|FlukeView ScopeMeter® demo package (restricted functionality)|
|USB Interface Cable|
|Warranty||Three years on main instrument, one year on accessories|
The Fluke ScopeMeter® 190-102 combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter® test tools go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications.
The 190-102 ScopeMeter® is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more: