Fluke 718 Pressure Calibrator

Product By Flir Logo

The complete solution to pressure calibration

The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.

Technical Specifications
Fluke 718 Series
Measure pressure(Internal sensor)
Accuracy0.025% full scale
FunctionsZero, min/max, hold, damp
Dry air, non-corrosives only
Fluke 718 1G
Range-1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
Resolution0.0001 psi, 0.001 mbar, 0.0001 kPa
Over pressure5x Full Scale
FunctionsZero, Min, Max, Hold, Damp
Fluke 718 30G
Range-12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)
Resolution0.001 psi, 0.1 mbar, 0.01 kPa
Over pressure5x Full Scale
FunctionsZero, Min, Max, Hold, Damp
Fluke 718 100G
Range-12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
Resolution0.01 psi, 0.1 mbar, 0.01 kPa
Over pressure2x Full Scale
FunctionsZero, Min, Max, Hold, Damp
Fluke 718 300G
Range-12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa)
Resolution0.01 psi, 1 mbar, 0.1 kPa
Over pressure375 psi 25 bar
FunctionsZero, Min, Max, Hold, Damp
Fluke 718 series via 700 Series Pressure Modules
Range29 pressure modules, 0 – 1 inH20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs
ResolutionPer pressure module specs
AccuracyTo 0.025% of full span, per pressure module specs
FunctionsZero, Min, Max, Hold, Damp
Media compatibility per pressure module specs
Fluke 718 Series Via Built in Pump
Range-12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm
Loop power range24 V DC
Drive; 20 mA into 1000 ? for battery > 6.8 V; 700 ? for battery 5.8 to 6.8 V
mA Measure
Range0 mA to 24 mA
Resolution0.001 mA
Accuracy0.015% + 1 count
General Specifications
Maximum voltage30 volts (non-operating)
Temperature-40°C to 60°C
Operating temperature-10°C to 55°C
Relative humidity95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C)
Operating altitude3,000 M max
Shock1 M drop test
VibrationRandom, 2 g, 5 Hz – 500 Hz
SafetyCSA C22.2 No. 1010.1: 1992
EMCEN50082-1: 1992 and EN55022: 1994 Class B
Size216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in)
Weight992 g (35 oz)
Power, battery life9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery life4 to 20 hours typical, depending on functions used
WarrantyThree years (one year on pressure pump in Fluke 718)
DisplayLCD, 5 digit pressure and current simultaneous