Fluke 810 Vibration Tester

Product By Flir Logo

Fluke 810 Vibration Tester: When you need an answer now...

Control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing.

The Fluke 810 Vibration Tester is the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. The unique diagnostic technology helps you quickly identify and prioritize mechanical problems, putting the expertise of a vibration analyst in your hands.

You take pride in your facility, your team, and your work. You do what it takes to keep things up and running, but sometimes there is not enough time or resources to keep up with the workload, let alone be proactive about mechanical maintenance. The Fluke 810 Vibration Tester puts you one step ahead by coupling a powerful diagnostic engine with a simple step-by-step process to report on specific machine faults and their severity the first time measurements are taken, without prior measurement history. Overall vibration measurements and spectral diagrams give technicians the ability to quickly asses overall machine health, while enhanced reporting and actionable recommendations give you the confidence you need to address critical problems first.

Diagnostic Specifications
Standard FaultsUnbalance, looseness, misalignment and bearing failures
Analysis ForMotors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles
Motor Rotational Speed Range200 rpm to 12000 rpm
Diagnosis DetailsPlain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra
Electrical Specifications
RangingAutomatic
A/D Converter4 channel, 24 bit
Usable Bandwidth2 Hz to 20 kHz
Sampling51.2 Hz
Digital Signal Processing FunctionsAutomatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging
Sampling Rate2.5 kHz to 50 kHz
Dynamic Range128 dB
Signal To Noise Ratio100 dB
FFT Resolution800 lines
Spectral WindowsHanning
Frequency UnitsHz, orders, cpm
Amplitude Unitsin/sec, mm/sec, VdB (US), VdB* (Europe)
Non-volatile MemorySD micro memory card, 2 GB internal + user accessible slot for additional storage
General Specifications
Dimensions (H x D x W)18.56 x 7.00 x 26.72 cm (7.30 x 2.76 x 10.52 in)
Weight (With Battery)1.9 kg (4.2 lb)
Display¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight
Input/Output ConnectionsTriaxial sensor connection4 pin M12 connector
Single axis sensor connectionBNC connector
Tachometer ConnectionMini DIN 6 pin connector
PC ConnectionMini ‘B’ USB (2.0) connector
BatteryBattery typeLithium-ion, 14.8 V, 2.55 Ah
Battery charging timeThree hours
Battery discharge timeEight hours (under normal conditions)
AC AdapterInput voltage100 VAC to 240 VAC
Input frequency50/60 Hz
Operating SystemWinCE 6.0 Core
Language SupportEnglish, French, German, Italian, Japanese, Portuguese, Simplified Chinese, Spanish
WarrantyThree-years
Environmental Specifications
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-20°C to 60°C (-4°F to 140°F)
Operating Humidity10% to 95% RH (non-condensing)
Agency ApprovalsCHINA RoHS, CSA, CE, C TICK, WEEE
Electromagnetic CompatibilityEN 61326-1:2006, EN 61010:1:2001 2nd ed.
Sensor Specifications
Sensor TypeAccelerometer
Sensitivity100 mV/g (±5%, 25°C)
Acceleration Range80 g peak
Amplitude Nonlinearity1%
Frequency ResponseZ2 - 7,000 Hz ±3dB
X, Y2 - 5,000 Hz ±3dB
Power Requirement (IEPE)18 VDC to 30 VDC, 2 mA to 10 mA
Bias Output Voltage12 VDC
GroundingCase grounded
Sensing Element DesignPZT ceramic / shear
Case Material316L stainless steel
Mounting10-32 captive socket head screw, 2-pole rare earth magnet (48 lb pull strength)
Output Connector4-Pin, M12
Mating ConnectorM12 - F4D
Non-volatile MemoryTEDS 1451.4 compatible
Vibration Limit500 g peak
Shock Limit5000 g peak
Electromagnetic Sensitivity, Equivalent g100 ?g/gauss
SealingHermetic
Temperature Range-50°C to 120°C (-58°F to 248°F) ±7%
WarrantyOne-year
Tachometer Specifications
Dimensions (D x W)2.86 x 12.19 cm (1.125 x 4.80 in)
Weight96 g (3.4 oz) with cable
PowerPowered by 810 Vibration Tester
DetectionLaser Diode Class 2
Range6.0 to 99,999 rpm
Accuracy6.0 to 5999.9 rpm±0.01% and ±1 digit
5999.9 to 99999 rpm±0.05% and ±1 digit
Resolution0.1 rpm
Effective Range1 cm to 100 cm (0.4 in to 39.27 in)
Response Time1 second (> 60 rpm)
ControlsMeasure on/off transparent button
Interface6 Pin Mini DIN
Cable Length50 cm (19.586 in)
WarrantyOne-year
Tachometer AccessoriesReflective tape1.5 x 52.5 cm (0.59 x 20.67 in)
Viewer PC Software
Minimum Hardware Requirements1 GB RAM
Operating System RequirementsWindows 7, 8.1, and 10